Metering, Chapter, Overview – Rockwell Automation 150 SMC-Flex User Manual User Manual
Page 101: Viewing metering data, Package
Chapter
5
Metering
Overview
While the SMC-Flex controller operates your motor, it also monitors
several different parameters, providing a full function metering
①
package.
Viewing Metering Data
To access the metering information, follow the procedure below.
➀
Refer to Metering on page 1-19 or Figure 4.2 on page 4-3 for details on the metering functions.
Description
Action
Display
—
—
1.
Press any of the following keys to
access the Main Menu.
2.
Scroll with the Up/Down keys until
the Parameter option is shown.
3.
Press the Enter key to select the
Parameter option.
—
4.
Scroll with the Up/Down keys until
the Monitoring option is displayed.
5.
Press the Enter key to access the
Monitoring group.
—
6.
Press the Enter key to access the
Metering group.
##.#
Amps
###
Volt
##
%MTU
Esc
Main Menu
Parameter
Memory Storage
Main Menu
Parameter
Memory Storage
G P :
File
Monitoring
Set Up
F
F
P :
Group
Metering
G