Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial - Manual (Page 12)

10
You can now edit the parameters of the copied starters to match the loads for Motors 2 and 3.
To edit the starters:
Right-click on the starter for Motor 2 to show the popup menu •
Select “Edit“ to open the confi gurator window • or just double click on the starter you
wish to edit
Adjust the contactor Hp rating and Frame Size of the circuit breaker according the load list •
– Horsepower = 10 Hp, Frame Size = 140M-C2E (C-Frame)
Select the “Accept” button •
Repeat this sequence for the Motor 3 starter •
– Horsepower = 15 Hp, Frame Size = 140M-D8E (D-Frame)
For Motors 4 & 5, the application requires reversing starters. Repeat the process you used for
Motor 1, except confi gure Bul. 107S reversing starters, beginning with Step 5.
Step 8:
Editing Component
Attributes