Rockwell Automation 1608N MiniDySC User Manual, 12-50 Amp - Manual (Page 8)

8 Rockwell Automation Publication 1608N-UM002B-EN-P - May 2014
Chapter 1 Installation
50 A ER MiniDySC
Figure 2 provides mounting dimensions for the 50 A extended ride through (ER).
Key slot dimensions are provided in Figure 14 .
Figure 2 - 50 A ER Mounting Dimensions
Wall Mounting the MiniDySC
There are two methods of mounting the MiniDySC to wall board as show in
Figure 3
Figure 3 - Wall Mounting
• Option 1 : Mount the MiniDySC to ½ inch wallboard using (4) #6 hollow
wall fasteners or (4) #10 toggle bolts.
• Option 2: Center one side of the MiniDySC on the wall stud and fasten
to a wood stud with (2) 2 – inch long #8 Phillips bugle-head screws or to a
metal stud with (2) 2-inch long #8 Philip bugle-head self drilling screws.
Fasten the other side of the MiniDySC with (2) hollow wall fasteners or
(2) #10 toggle bolts.
16.00
(406.40)
17.52
(444.93)
Vent holes in both sides.
Maintain 3 in. clearance
for proper cooling.