Rockwell Automation 1398 F-Series Brushless Servo Motor Manual - Manual (Page 4)

Dimensional Data
Intro
SHAFT END PLAY UNDER LOAD SHAFT END THREADED HOLE
Maximum End Play (All Motors) Load Applied to Shaft
Direction mm/in Motor Series Kg/Lb Motor Series Thread Thread/Depth
→
A
0.025/0.001 F-4000 9.07/20.0 F-4000 M6 x 1.0mm 15mm/.59in
←
B
0.254/0.010 F-6000 22.68/50.0 F-6000 M8 x 1.25mm 20mm//.79
NOTE: End play and load are measured in inches and pounds. Metric measurements are approxi-
mate conversions from inches and pounds.
Note: Motors are manufactured to millimeter dimensions. Inch dimensions
are approximate conversions from millimeters.
BF DIA HOLES - AJ DIA BOLT CIRCLE
P AK
AB
SHAFT END THREADED HOLE
U
S
XD
BB
AH L
BRAKE OPTION
6200, AND 6300 MOTORS ONLY.
2 EYE BOLTS INSTALLED ON F-6100,