Rockwell Automation 1398 F-Series Brushless Servo Motor Manual - Manual (Page 8)

F-4000 Series NEMA 56C Motors
Dimensions Without Brake With Brake
Motors in/mm in/mm Note:
NEMA 56C motors are manufactured to
inch dimensions. Millimeter dimensions
are approximate conversions from
inches.
F-4030 NEMA 56C 7.64/194 10.12/257
F-4050 NEMA 56C 10.71/272 13.19/335
F-4075 NEMA 56C 13.79/350 16.26/413
SUPPLEMENTAL MOTOR DIMENSIONS
Length, from motor faceplate to center of connectors
Brake Power Encoder
Motors (in/mm) (in/mm) (in/mm)
F-4030 — 4.97/12.6 6.77/17.2
F-4030 BRAKE 2.21/5.6 7.45/18.9 9.25/23.5
F-4050 — 8.04/20.4 9.84/25.0
F-4050 BRAKE 2.21/5.6 10.52/26.7 12.32/31.3
F-4075 — 11.12/28.2 12.92/32.8
F-4075 BRAKE 2.21/5.6 13.59/34.5 15.39/39.1
Intro
Intro
1.41/36
0.875/22 DIA
0.625/15.9 DIA
0.12/3
0.64/16.3
2.06/52
BRAKE OPTION
Motor Length
6.50/165 DIA
MOTOR WILL ACCEPT 1.437 INCH X 0.875 INCH
0.25 INCH SHAFT SEAL (OPTIONAL, NOT
INCLUDED, RELIANCE P/N 0041-5060)
4.500/114.3 DIA
3/8-16 THRU (4) EQ SP.
90° APART ON A 5.875/149 DIA BC
0.1875/4.8 SQUARE X 1.375/35 LONG
KEY SUPPLIED