Rockwell Automation 1400-SP PowerMonitor Software - Manual (Page 36)

Chapter 4
Using The Software
4–10
Important: The Powermonitor Software password is not the unit password.
Figure 4.4
Powermonitor Software Software Password Screen
To change the Powermonitor Software password, return to the MAIN MENU
by pressing the <Esc> key, position the cursor onto the CHANGE
PASSWORD option and press the <Enter> key.
The Powermonitor Software prompts the user to enter the present password.
When this password has been correctly entered, the user is asked to enter the
new password and then asked to re–enter the new password again for
confirmation. The password can be any alphanumeric string up to 20
characters in length. Blanks are not permitted.
If the attempt to change the Powermonitor Software password is successful,
the following message will be displayed:
PASSWORD
HAS BEEN UPDATED
If the attempt to change the Powermonitor Software password is not
successful, the following message will be displayed:
PASSWORD
HAS NOT CHANGED
On completion of the CHANGE PASSWORD function, the MAIN MENU
will be displayed.