Rockwell Automation 931U-C9C7C-BC Configurator Software - Manual (Page 48)

Page | 48
The green Status LED is flashing
It indicates sensor wiring (short circuit or open cir‐
cuit) or internal fault.
See description in chapter
171H171H171H
3 to identify
fault source.
The DC output is incorrect
1 Ensure the input type and range are configured
as required and wiring connections are correct.
2 Check the output configuration settings for cor‐
rect range and transfer functions including direct
or re‐verse action.
The alarm relays have no function
1 Check the relay configuration settings including
set‐point, alarm type are as required and as de‐
scribed in chapter
172H172H172H
Error! Reference source not
found..
2 Check the input type and range is as required.
3 Check the input connections are made correctly.
The alarm relays are on / off with the wrong
values of input
1 Check the relay configuration settings including
set‐point, alarm type are as required and as de‐
scribed in chapter
173H173H173H
Error! Reference source not
found..
2 Check the input type and range is as required.
3 Check the input connections are made correctly.