Run system tests, Figure 27 - system tests, Diagnostics mode – Rockwell Automation 1608P ProDySC User Manual, 25 and 50 A User Manual
Page 29: Run system tests diagnostics mode
Advertising
Rockwell Automation Publication 1608P-UM001A-EN-P - July 2013
29
Display Screen
Chapter 5
Run System Tests
Press the "RUN SYSTEM TESTS" to enter the “System Tests” screen. Press “2
MINS” to run the system fans for 2 minutes (See
Figure 27 - System Tests
Diagnostics Mode
This is not a user function. It is numerical code protected for authorized service
personnel.
Advertising