Rockwell Automation 931S-C3C3J-DC Active Converter User Manual
Page 5
Connections
For effective protection from electromagnetic noise, all signal
cables must be shielded, or located on conductive trays or in
conduits.
Strip wires to 7 mm from the ends. Use a suitable ferrule for multi-
stranded wires (do not solder).
Terminal
Signal
1
Supply +
Power Supply
7
Supply −
4
Voltage Input +
Voltage Input
Input Type Jumper to ‘Volts’
Field Supply Jumper to ‘Off’
3
Voltage Input −
2
Current Input +
Current Input
Input Type Jumper to ‘Current’
Field Supply Jumper to ‘Off’
3
Current Input −
3
Device +
Loop Powered Trans-
mitter Input
Input Type Jumper to ‘Current’
Field Supply Jumper to ‘On’
2
Device −
6
Voltage Output +
Voltage Outputs
Output Type jumper to ‘Volts’
5
Voltage Output −
8
Current Output +
Current Outputs
Output Type jumper to ‘Current’
5
Current Output −