Rockwell Automation 1413-ME-PEA Capacitor Bank Controller - Series B - Manual (Page 8)

Publication 1413-UM001C-EN-P - May 2006
6 General Information
• Alarms
– Bad step, indicates blown fuse, capacitor failure
– Target power factor not achieved
– High / Low voltage
– %THD High
– Current unbalance
– Metering
• Powermonitor data concentrated into the MicroLogix 1500
controller
• Phase current, line voltage, frequency, real and reactive power,
power factor and THD
Options
• Up to three additional Powermonitor meters to aggregate up to
four total feeds
• PanelView 550 keypad HMI terminal with serial or Ethernet
communications
• Ethernet Powermonitor meters to produce power and energy
data via your local area network