Rockwell Automation 1397 400-600HP AC Line Filter Kit Inst. - Manual

Installation Instructions
IN
1397-5.31 September, 1998
Allen-Bradley
1397
400-600HP AC Line Filter Kit
Cat. Nos. 1397-LF600
User Supplied Items You must provide three (3) pieces of 600V, 14 AWG wire (each
approximately 1.2 m (4 ft) in length) to connect the kit to the drive’s
AC input bus bars.
What This Option Provides This option is intended to be applied when the primary of the drive
source power transformer is greater than 2300 V RMS. The AC Line
Filter consists of six capacitors, arranged in three pairs of two
capacitors connected in series. The kit helps to attenuate high voltage
spikes that capacitively couple from the transformer primary to the
secondary. Kit installation consists of connecting the capacitor grid
from the AC input line to ground of the transformer secondary.
What This Kit Contains Each 1397 - AC Line Filter Kit
Includes:
Part No.
◗ (1) Capacitor Assembly 802278-925R
◗ (1) Fuse Block, Triple 49454-19C
◗ (3) Fuse (7.5A, 600V 64876-84N
◗ (1) Wire Harness 802276-924R
◗ (6) Spade Connector (Female) 411066-15B
◗ (2) M6 x 25 Self Threading Screw 419082-100PJM
◗ (6) M4 x 12 Self-Threading Screw 419062-100PGH
◗ (2) M6 Star Washer 419064-101SJ
◗ (6) M4 Flat Washer 19064-1SG
◗ (1) Plastic Cover 802276-920R