Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual - Manual (Page 6)

ii Rockwell Automation Publication 1492-UM08A-EN-P - June 2010
Preface
Safety and the Environment Safety Instructions
Depending on the model, the ClearMark printer is configured with a power
supply for AC voltage of either 110V or 220V.
Disposal of the ink cartridge
The empty ink cartridges can be disposed of with general waste.
Disposal of the ink waste pad
If the operating panel displays the following messages:
Ink Collector is full/Replace
Ink Collector Unit or Ink Collector almost full, the ink waste pad must be replaced.
The ink waste pad contains a collecting membrane.
Dispose of the ink collector unit with general waste.
ATTENTION: Only plug the printer into a grounded outlet.
Turn off all relevant devices (computer, printer, or accessories) before
connecting or disconnecting the devices. The printer should only be
operated in a dry environment with no exposure to moisture (splashed
water, fog, etc.).
ATTENTION: Parts of the device can become hot during operation.
At the end of its life, this equipment should be
collected separately from any unsorted municipal waste