Rockwell Automation Allen-Bradley Plot Software User Manual - Manual (Page 5)

INSTALLATION 5
INSTALLATION Before installing the Plotter Software, make sure that your system complies
with the following requirements.
SYSTEM REQUIREMENTS
• Personal computer with at least an 80486 processor
• Minimum RAM 8 MB
• Microsoft™ Windows 95 or later
• CD Drive
• Hard drive with at least 50 MB space available
• Windows-compatible mouse
• Screen resolution 640 x 480, 800 x 600 or 1024 x 768
• Open parallel communications port or USB port
INSTALLING PLOTTER SOFTWARE
The following procedure assumes that you have already installed the Win-
dows operating system and are familiar with the basic principles of it. If this
is not the case, you should refer to the Windows User's Handbook.
Note: The screenshots correspond to Windows XP.
Installation/Update procedure (Online):
Use the following instructions to download the application.
1. Go to: http://www.ab.com/industrialcontrols/products/
terminal_blocks_and_wiring/marking_systems_access/abplot.html