Rockwell Automation Allen-Bradley Plot Software User Manual - Manual (Page 8)

INSTALLATION 8
5. You are prompted to enter the
drive or path to store the
source files. After doing so,
select Next.
Figure 5 The “Choose Destination Location” Directory Dialogue Window
6. Finally, the Setup Program
displays the message that the
installation has been
successfully completed. Should
you have any questions or
encounter any problems, please
refer to Support and Updates
for further advice.
Figure 6 The “Select Program Folder” Target Directory Dialogue Window
INSTALLING GENERIC PRINTER DRIVER
The plotter software requires that a generic printer drive be installed on a
parallel or USB printer port for your computer.
The following procedure assumes that you have already installed the Win-
dows operating system and are familiar with the basic principles of it. If this
is not the case, you should refer to the Windows User's Handbook.
This procedure shows screens from Windows XP. Earlier versions of win-
dows will have a similar procedure, but the screens may look different.