Rockwell Automation N-Series Brushless Servo Motor - Manual

Publication 1398-IN519A-EN-P — March 2001
Installation Instructions
N-Series Brushless Servo Motor
(Catalog Number N-2302-1, N-2304-1, N-3406-2, N-3412-2, N-4214-2, N-4220-2,
N-5630-2, N-5637-2, and N-5647-2)
These Installation Instructions describe how to install the N-Series
motors. Use this document if you are responsible for designing,
installing, or troubleshooting the Allen-Bradley N-Series motor
products. Read all instructions before installing this motor.
For: See Page
Receiving and Maintenance Information 2
Motor Catalog Number Identification 2
Before You Install the Motor 3
Using Couplings and Pulleys 3
Preventing Electrical Noise 4
Building and Installing Cables 5
Installing Your Motor 6
Guidelines for Installation 7
Mounting Dimensions 8
Connector Data 10
Motor Load Force Ratings 11
Shaft Load Force Ratings 12
Motor Radial Load Force Ratings 12
Cables and Connector Kits 13
Shaft Seal Kits 13