Rockwell Automation 1395 Node Adapter Board User Manual
Page 6
Chapter 1
Before You Begin
1-2
Manual Organization
Table 1.A provides a brief overview of topics covered in this manual and
their location within the book.
Chapter
Title
Topics
2
3
4
5
6
7
Introduction and
Product Description
Configuration & In-
terfaces
Installation
Start-Up
Troubleshooting &
Maintenance
Periodic
Maintenance
Table 1.A
Manual Organization
Board Identification, Hardware Content,
Hardware requirements for Interfacing.
Configuring the Drive for the Node
board and interfacing the Drive with a
PLC controller.
Unpacking & Inspection, mounting, wir-
ing, switch settings etc.
Configuring the Drive.
Fault Diagnostics.
Preventative Maintenance & Inspections
Specifications
Electrical:
Board power provided by Drive (+5V)
Environmental:
Ambient Operating Temperature
0
° to 60°C (32° to 140°F)
Storage Temperature
–40
° to +85°C (–40° to +185°F)
Relative Humidity
5% to 95% non-condensing
Altitude:
3,300 feet (1,000 Meters)
Firmware Version
3.xx
Communications
Allen-Bradley Remote I/O (RIO)
Baud Rates: 57.5 KB/ 115KB
Rack Configurations:
1
/
2
to Full