Rockwell Automation 1792D-8BVT8D ArmorBlock MaXum 8 Input/8 Output Module Series B - Manual (Page 5)

ArmorBlock MaXum 8 Input / 8 Output Module Series B 5
Publication 1792D-IN020B-EN-P - September 2000
Note: Dimensions change according to the cable base and
module combination used.
Connect the Input / Output Cord Sets to the MaXum
Module
This module uses 5 pin micro (12mm) style PCB mounted connectors.
Eight micro caps cover the connectors on your module. Remove the
caps and connect your cord sets to the appropriate ports. This
product has two inputs or outputs per I/O connector. Use a “Y”
splitter cable for access to all I/O connections.
Align the
screws to
properly
assemble the
module to the
base.
Cable Base 1792D-CBFM is
used for this example.
Assembled
dimensions in (mm)
1.9 (48.26)
2.7 (68.6)
6.85 (174mm)
41522