Rockwell Automation Logix5000 Controllers Nonvolatile Memory Programming Manual - Manual (Page 20)

Chapter 1 Store and load a project by using a memory card
5. At the bottom of the Image in Nonvolatile Memory area, click Load -->.
A dialog box asks you to confirm the load.
6. To load the project from the memory card, click Yes.
The table describes the events that occur for these memory cards.
Logix Designer application goes offline.
When the load is finished, you remain offline.
If using And the load Then the OK status indicators display
CompactFlash Card Does not include
firmware
Solid red> solid green
Includes firmware Flashing red> solid red> solid green
SD Card Does not include
firmware OK status indicator is solid green; SD status indicator flashes
green.
Status Display shows LOAD. See the illustration.
Includes firmware OK status indicator flashes red; SD status indicator flashes
green.
Status Display shows UPDT. See the illustration.
20 Rockwell Automation Publication 1756-PM017F-EN-P – October 2014