Rockwell Automation 1734-IK/C POINT I/O 5V and 24V Encoder/Counter Module Installation Instructions - Manual (Page 10)

10 POINT I/O™ 5V and 24V Encoder/Counter Modules
Publication 1734-IN005G-EN-E - September 2012
Wire the Module
Point I/O 5V and 24V Encoder/Counter Module
WARNING: If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
Input A
ret
Input A
Input B
Input Z
Input B
ret
Input Z
ret
Chassis ground Chassis ground
42016
Module status
Network status
Status of Input A
Status of Input B
Status of Input Z
Input A
Input B
Input Z
Input A
ret
Input B
ret
Input Z
ret
Chassis ground
46070