Rockwell Automation 1785-Lx6B,D17856.5.13 MNL. PLC-5 PROTECTED PROCESSOR - Manual (Page 11)

2 Chapter
2-1
Configuring Passwords and Privileges
If you want to read about: Go to page:
Guidelines for assigning passwords and privileges 2-2
Assigning passwords and privileges to classes 2-3
Assigning default privilege classes for channels and offline files 2-6
Assigning read and write privileges for channels 2-7
Assigning privileges for specific stations/nodes 2-8
Assigning read and write privileges for a program file 2-9
Assigning read and write privileges for a data-table file 2-10
Restoring default privilege classes 2-11
Acquiring the privileges of a different class 2-11
Important: When you first install the 6200 Series PLC-5 Programming
Software, this screen appears:
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
| Contents: PLC–5 Prog Dev & Doc SW |
| Catalog Number: 62xx–PLC5 |
| Part Number: xxxxxx–xx |
| Release Number: x.x Quantity: x Disks |
+––––––––––––––––––––––––––––––––––––Status––––––––––––––––––––––––––––––––––––+
| 0% Complete +-------------------------------------------------+ |
| | | |
| +-------------------------------------------------+ |
| 0k Copied 0% 25% 50% 75% 100% |
+––––+–––– SELECT APPROPRIATE PASSWORD & PRIVILEGE OPTION –––+––––+
| |NO – Do not provide the ability to configure Passwords & Privileges| |
| |YES – Provide the ability to configure Passwords & Privileges | |
| |RETURN TO DOS – Refer to Documentation | |
| +––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+ |
| |
| |
You must choose the following option:
YES - Provide the ability to configure Passwords & Privileges
For more information on installing the software as well as configuring
passwords and privileges, see the PLC-5 Programming Software
Configuration and Maintenance manual, publication 6200-6.4.6.
Using this Chapter