Rockwell Automation 1785-Lx6B,D17856.5.13 MNL. PLC-5 PROTECTED PROCESSOR - Manual (Page 18)

Chapter 2
Configuring Passwords and Privileges
2-8
Each station/node that attaches to this processor’s DH+ r channel defaults to
the privilege class that is assigned to its channel; as system administrator,
however, you can give a particular node a unique privilege class.
Important:
• Node privilege classes override the default privilege class of the channel
that is assigned on the Channel Privilege screen.
• If you give any node class-1 privileges, an end user can configure a
terminal to attach as that node, creating a potential security risk.
Specify a privilege class for a node by following the steps on the left.
Node Privilege Class
Channel Station Address Link ID Privilege Class Name
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Press a function key or enter a value.
>
Rem Prog Forces:None 5/46 File PROTECT
Select
Priv
F10
The field in this column: Specifies the:
Channel channel to which this node is attached
Station Address station address of the node on the channel
Link ID link number used to identify the DH+ link to which the
node you are specifying is attached
Privilege Class Name privilege class of the node
By default, the privilege class of the node is the privilege
class of the channel
Cursor to Appropriate
Select (Toggle) Privileges
Node Privileges
Field in Channel Column
Until Desired Channel is Displayed
Cursor to Appropriate
Select (Toggle) Privileges
Field in Station Address Column
Enter Station Address
(0–77 Octal)
Cursor to Appropriate
Field in Link ID Column
Enter Link ID
Cursor to Appropriate
Field in Privilege Class Name Column
Channel
Overview
6200
Main Menu
General
Utility
F3
Online
Program
Offline
Program
F1
F7
or
F4
F3
F10
F10
Assigning Privileges for
Specific Stations/Nodes