Rockwell Automation 1771-P4S_P6S_P4S1_P6S1 Power Supply Modules Installation Instructions - Manual (Page 12)

Publication 1771-IN079A-EN-P - June 2002
12 Allen-Bradley Power Supply Modules
Specifications
1771-P4S 1771-P6S 1771-P4S1 1771-P6S1
Input Voltage 120V ac, 0.9A 220V ac, 0.5A 100V ac, 1.06A 200V ac, 0.53A
Input Range 97-132V ac rms 194-264V ac rms 85-120V ac rms 170-240V ac rms
Frequency 47-63Hz 47-63Hz 47-63Hz 47-63Hz
Fuse 250V, 1.5A, Bussman MDL 1.5, Littelfuse 31301.5, IEC 127 Type T (Blue)
Output Voltage (backplane) 5V dc
Output Current (maximum) 8A (see derating curve below)
Power Dissipation 16W
Thermal Dissipation 47.8 BTU/hr
Adjacent Slot Power Dissipation 10W maximum
Branch Circuit Protection
1 15A maximum (user supplied)
Environmental Conditions
Operational Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0 to 60°C (32 to 140°F)
Storage Temperature IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock):
-25 to 80°C (-13 to 176°F)
Relative Humidity IEC 60068-2-30 (Test Db, Unpackaged Nonoperating
Damp Heat):
5 to 95% noncondensing
Shock
Operating
Non-operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30g peak acceleration
50g peak acceleration
Vibration IEC 60068-2-6, (Test Fc, Operating)
Tested 2g @ 10-500Hz
Isolation Voltage Tested to withstand 1000V ac for 60s
Enclosure Type Rating None (open style)
Conductors Wire Size
Category
14AWG (2.4mm 2 ) maximum, solid or stranded copper wire rated at 60°C or greater
3/64 inch (1.2mm) insulation maximum
1
2
5 Position Terminal Block
A-B PN 941274-55, Wago
3
PN 231-002/027-000 (1 included with each power supply)
Certifications (when product is marked) UL UL Listed Industrial Control Equipment, certified for US and Canada
C-UL UL Listed for Class I, Division 2, Groups A, B, C and D Hazardous locations,
certified for Canada
CE
4
European Union 89/336/EEC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN61326; Meas./Control/Lab Industrial Requirements
EN 61000-2; Industrial Emissions
European Union 73/23/EEC LVD Directive, compliant with:
EN 61131-2, Programmable Controllers
C-TicK
4
Australian Radiocommunications Act compliant with:
AS/NZS 2064, Industrial Emissions
1 Provided in all ungrounded mains connections.
2 .Use this conductor category information for planning conductor routing as described in publication 1770-4.1, “Industrial Automation Wiring and Grounding Guidelines
3 Wago Corporation, 9085 N. Deerbrook Trail, Brown Deer WI 53223
4 See the Product Certification link at www.ab.com for Declaration of Conformity, Certificates, and other certification details