Configure the serial port – Rockwell Automation 1747-WINBAS Software Programming Manual User Manual
Page 23
Advertising
Publication 1747-PM001A-EN-P - January 2007
Getting Familiar With Your BASIC Interface Software 21
Configure the Serial Port
Follow these steps to configure the serial port.
1. Click the hand-on-paper icon.
See icon number 8 on page 20.
The following dialog appears.
2. From each pull-down menu, choose a value for each parameter.
• Connection
• Bits per second
• Data bits
• Parity
• Stop bits
• Flow control
Advertising