Belkin High Performance Wireless VPN Router N300 - Manual (Page 100)

97
VPN
L2TP Network
L2TP
Authentication
Select the desired authentication
protocol (PAP, CHAP, MSCHAP_V2).
Select MSCHAP_V2 by default
Account
Select accounts form available to member
for authentication. You should set these
available users in user setting page.
Network
Server IP
Assign the VPN Server IP address.
(example: 192.168.99.1)
Remote IP Range
Assign a range of IP addresses. The assigned
IP range should be on the same range as the
Server IP (example: 192.168.99.21 – 50)