Belkin High Performance Wireless VPN Router N300 - Manual (Page 55)

52
WIRELESS
Basic
Radio Enable or Disable the device’s wireless signal.
Mode Select between Access Point or Wireless Distribution System (WDS) modes.
Band
Select the types of wireless clients that the device will accept.
e.g.: 2.4 GHz (B+G+N)
Only 802.11b and 11g clients will be allowed.
Enable SSID#
Select the number of SSID’s (Wireless Network names) you would like.
You can create up to 4 separate wireless networks.
SSID# Enter the name of your wireless network. You can use up to 32 characters.
Auto Channel
When enabled, the device will scan the wireless signals around your
area and select the channel with the least interference.
Channel Manually select which channel the wireless signal will use.
Check Channel Time
When Auto Channel is Enabled, you can specify the period that the
device will scan the wireless signals around your area.