Belkin High Performance Wireless VPN Router N300 - Manual (Page 98)

95
VPN
L2TP Network
L2TP
Authentication
Select the desired authentication
protocol (PAP, CHAP, MSCHAP_V2).
Select MSCHAP_V2 by default
Account
Select accounts form available Users to
member for authentication. You should set
these available users in user setting page.
Network
Server IP
Assign the VPN Server IP address.
(example: 192.168.99.1)
Remote IP Range
Assign a range of IP addresses. The assigned
IP range should be on the same range as the
Server IP (example: 192.168.99.21 – 50)