Belkin High Performance Wireless VPN Router N300 - Manual (Page 53)

50
INTERNET
Layer-2 Tunneling Protocol (L2TP)
WAN Interface Type Select whether the ISP is set to Static IP or will allocate a Dynamic IP address.
Hostname This is optional. Only required if specified by ISP
MAC address The MAC Address that is used to connect to the ISP.
Username Username assigned to you by the ISP
Password Password for this username.
Service IP Address The IP Address of the L2TP server.
MTU
The maximum size of packets.
Do not change unless mentioned by the ISP.
Type
You can choose the method that the router maintains a connection with the ISP.
Keep Connection: The device will maintain a constant connection with the ISP.
Automatic Connection: The device will only initiate a connection to the ISP when there is
an Internet connection request made from a LAN device.
Manual Connection: The user will need to manually connect to the ISP by clicking the Connect button.
Idle Timeout:
When the connection type is Automatic Connection, and when Internet traffic
is idle, then the device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.