Rockwell Automation 1771-ODD INSTL.DATA AC/DC (220/44)INPUT - Manual (Page 8)

AC (120V) Isolated Output Module, 16 Outputs 8
Publication 1771Ć5.20 - January 1999
Note: You can use the shorting bar supplied with your module to
connect the L1-0 through L1-17 high side ac power connections
together if no isolation is required.
You should identify the labels on the wiring arm with the name or
number of the device connected at each terminal.
You can use an output of the 1771-ODD module to drive an input of
a 120V ac input module (1771-IA, -IA2, -IAD,-ID), as shown below,
to indicate status of turning on a motor starter, for example. Inputs
configured with the output module are not isolated from each other.
!
ATTENTION: Do not connect the 1771-ODD output
channels in series. Doing so can result in distortion of
the output waveform causing the output devices to
chatter.
Using the 1771-ODD Output Module to drive an Input Module
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 10
Output 11
Output 12
Output 13
Output 14
Output 15
Output 16
Output 17
L1
ac High
ac Low
L2
L1 Ć 0
L1 Ć 1
L1 Ć 2
L1 Ć 3
L1 Ć 4
L1 Ć 5
L1 Ć 6
L1 Ć 7
L1 Ć 10
L1 Ć 11
L1 Ć 12
L1 Ć 13
L1 Ć 14
L1 Ć 15
L1 Ć 16
L1 Ć 17
Not Used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
120V ac
Supply
L1 L2
Input 00
Input 01
Input 02
Input 03
Input 04
Input 05
Input 06
Input 07
Input 10
Input 11
Input 12
Input 13
Input 14
Input 15
Input 16
Input 17
AC (120V) IsolatedOutput Module
Cat. No. 1771ĆODD
AC/DC (120V) Input Module
Cat. No. 1771ĆIAD
10945ĆI