Rockwell Automation 1746-BLM Blow Molding Module Installation Instructions User Manual
Blow-molding module
Advertising
Table of contents
Document Outline
- 1746-IN014B-EN-P
- Blow-molding Module
- Before you begin
- Tools that you need
- Handling the Module
- Important User Information
- Recommendation for using associated software
- What you need to do to set up and operate the module?
- Step: 1 Module description
- Step: 2 Machine applications of the module
- Step: 3 Module operation with an accumulator machine
- Step: 4 Module operation with a continuous extrusion machine
- Step: 5 Determining an axis setpoint
- Step: 6 Wiring the module
- Step: 7 Configuring the SLC processor (including I/O, M0/M1, and G file)
- Step: 8 Axis Control Structures in M0/M1 Files
- Step: 9 Using output and input image tables
- Step: 10 Writing Ladder Logic
- Step: 11 Calibrating the module
- Step: 12 Tuning a PID Loop
- Step: 13 Troubleshooting
- Descriptions of module parameters
- European Communities (EC) Directive Compliance
- Rockwell Automation Support
- Hazardous Location Approval
- Backcover