Rockwell Automation 1738-AENTR, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapter - Manual (Page 14)

14 1738 ArmorPOINT I/O Dual Port EtherNet/IP Adapter
Publication 1738-IN030A-EN-P - July 2013
Inrush current, max 6 A for 10 ms
Input overvoltage protection Reverse polarity protected
POINTBus output current, max 5V DC @ 0.8A
Auxiliary power cable (1) Standard cordset (single-ended), for example Allen-Bradley part
number 889N-F4AFC-6F or 889N-R4AFC-6F.
Standard patchcord (double-ended), for example, Allen-Bradley
part number 889N-F4AFNU-6F or 889N-F4AFNV-6F.
Interruption Output voltage stays within specifications when input drops out
for 10 ms @ 10V with max load.
(1) Refer to publication M117-CA001A-EN-P for more information.
Ethernet Communication
Attribute Value
Ethernet communication rate 10/100 Mbits/s, half or full-duplex
Ethernet ports 2, configured as Embedded Switch
Ethernet network topologies supported Star, Tree, Daisy-chain/Linear, and Ring
Ethernet connectors M12, D code, female, with Ethernet keying
Ethernet cable Category 5:
shielded or unshielded
General Specifications
Attribute Value
Indicators 3 red/green status indicators on CPU:
– Module status
– Network status (Ports 1 and 2 combined)
– POINTBus status
1 green/yellow status indicator on CPU:
– Network activity (Ports 1 and 2 combined)
2 green/yellow status indicators on base:
– Link 1 activity/status
– Link 2 activity/status
2 green power supply status indicators on DC-DC Converter:
– System power (5V DC to POINTBus Out)
– Adapter power (24V DC from Field In)
Power consumption, max 10.4 W @ 28.8V DC
Power dissipation, max 6.3 W @ 28.8V DC
Power Supply
Attribute Value