Rockwell Automation 1734-AENTR, Series B 1734 POINT I/O Dual Port EtherNet/IP Adapter Installation Instructions - Manual (Page 16)

16 1734 POINT I/O Dual Port EtherNet/IP Adapter
Publication 1734-IN041B-EN-P - October 2013
Interpret Status Indicators
Refer to the following diagram and table for information on how to interpret the
status indicators.
POINT I/O Dual Port EtherNet/IP Adapter, Series B
Indicator Status for Modules
Indicator Status Description
Module
status Off No power applied to device
Flashing green Device needs commissioning due to missing, incomplete, or
incorrect configuration.
Solid green Device operating normally
Flashing red Recoverable fault.
Complete firmware update, verify address switches.
Solid red Unrecoverable fault, may require device replacement
Flashing
red/green
Module self-test
43264
0 2 0 1734-AENTR Series B
Module
Status
Network
Activity
Network
Status
Point Bus
Status
System
Power
Field
Power
POINT I O
Link 1
Activity/
Status
Link 2
Activity/
Status
IP ADDRESS
Network status
POINTBus status
System power
Field power
NC
Chas Gnd
C
V
Module status
Network activity
Network address
thumbwheels
Ethernet
RJ-45
connectors