Rockwell Automation 1746-NR8 SLC 500 RTD/Resistance Input Module User Manual - Manual (Page 21)

1 Publication 1746-UM003A-EN-P
Chapter
2
Installation and Wiring
This chapter tells you how to:
•
comply to European union directives
•
avoid electrostatic damage
•
determine the RTD module’s chassis power requirement
•
choose a location for the RTD module in the SLC chassis
•
install the RTD module
•
wire the RTD module’s terminal block
This product is approved for installation within the European Union and EEA
regions. It has been designed and tested to meet the following directives.
Compliance to Europe
Union Directives EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:
•
EN 50081-2
EMC - Generic Emission Standard, Part 2 - Industrial Environment
•
EN 50082-2
EMC - Generic Immunity Standard, Part 2 - Industrial Environment
This product is intended for use in an industrial environment.