Specifications – Rockwell Automation 1753-IB16 GuardPLC Digital Input Module Installation Instructions User Manual
Page 12
12 GuardPLC Digital Input Module
Rockwell Automation Publication 1753-IN004C-EN-P - June 2010
Specifications
Technical Specifications – 1753-IB16 Module
Attribute
1753-IB16
Interfaces: GuardPLC
Ethernet
2 x RJ45, 10/100BaseT (with 100 Mbit/s) with integrated switch
Operating voltage
24V DC, -15…20%, w
ss
15% from a power supply with protective separation,
conforming to IEC 61131-2 requirements
Isolation voltage
50V (continuous), Basic Insulation Type, I/O to Ethernet and Ethernet to DC
power
Wiring category
(1)
(1)
Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publicat
.
Category 2 on communication ports, signal ports, and power ports
Wire size
•
I/O – 0.13…1.3 mm
2
(26…16 AWG) solid or stranded copper wire rated at
75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
•
Power – 0.33…2.1 mm
2
(22…14 AWG) solid or stranded copper wire rated
at 75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
•
Ethernet – RJ45 connector according to IEC 60603-7, 2 or 4 pair Category
5e minimum cable according to TIA 568-B.1, or Category 5 cable according
to ISO/IEC 24702
Wire type
Shielded on Ethernet
Terminal block torque
0.51 N•m (4.5 lb•in)
Fuse (external)
24V DC power: 10 A (time-lag)
Response time
≥
10 ms
Battery backup
None
Current consumption
0.8 A max (with max load), 0.4 A idle current
Enclosure type rating
Meets IP20
Width, approx.
152 mm (5.99 in.) including housing screws
Height, approx.
114 mm (4.49 in.) including latch
Depth, approx.
66 mm (2.60 in.) including grounding bolt
Weight, approx.
0.7 kg (1.54 lb)
Digital Inputs
Number of inputs
16 (not electrically isolated)
1 Signal
Voltage: 15…30V DC, Current consumption:
≥
2 mA @ 15V
0 Signal
Voltage: 5V DC max, Current consumption:1.5 mA max (1 mA @ 5V)
Switching point
Typically 7.5V
Switching time
Typically 250
μ
s
Sensor supply
4 x 19.2V / 40 mA @ 24V short-circuit proof