Rockwell Automation 1771-IL Installation Instructions - Manual (Page 2)

Isolated Analog Input Module 2
Publication 1771Ć5.62 - November 1998
This product has the CE mark and is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards,
in whole or in part, documented in a technical construction file:
•
EN 50081-2EMC – Generic Emission Standard,
Part 2 – Industrial Environment
•
EN 50082-2EMC – Generic Immunity Standard,
Part 2 – Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as these Allen-Bradley
publications:
Publication Publication number
Industrial Automation Wiring and Grounding Guidelines
For Noise Immunity
1770Ć4.1
Guidelines for Handling Lithium Batteries AGĆ5.4
Automation Systems Catalog B111
This equipment is classified as open equipment and must be mounted
in an enclosure during operation to provide safety protection.
Understand Compliance to
European Union Directives