Rockwell Automation 1771-IQ16 DC (24V) Isolated Input Module Installation Instructions - Manual

Publication 1771-5.25 - November 1999
DC (24V)
Isolated Input Module
Cat. No. 1771-IQ16 Series C
This document provides information on:
To: See Page:
Prevent Electrostatic Damage 1
PreInstallation Information 2
Understand compliance to European Union directives 3
Calculate power requirements 3
Set the input filter jumpers 4
Key the backplane connector 5
Install the module and field wiring arm 5
Connect the wiring to the module 6
For this reference information See page
Interpret the Status Indicators 9
CSA Hazardous Location 11
Specifications 12
The dc isolated input module is shipped in static-shielded packaging
to guard against electrostatic discharge damage. Observe the
following precautions when handling the module.
Electrostatic Discharge Damage
!
ATTENTION: Electrostatic discharge can damage
integrated circuits or semiconductors if you touch
backplane connector pins. Follow these guidelines
when you handle the module:
•
Touch a grounded object to discharge static potential
•
Wear an approved wrist-strap grounding device
•
Do not touch the backplane connector or
connector pins
•
Do not touch circuit components inside the module
•
If available, use a static-safe work station
•
When not in use, keep the module in its original
static-shielded packaging
Installation Instructions
To The Installer
Prevent Electrostatic
Damage