Rockwell Automation 1793-OB4E FLEX INTEGRA 4 PROTECTED OUTPUT User Manual
Flex integra 4 protected output module, Installation instructions, Module installation
FLEX Integra and FLEX I/O are trademarks
of Rockwell Automation
Publication 1793-5.2 - January 2000
Installation Instructions
FLEX Integra 4 Protected Output Module
(Cat. No. 1793-OB4P and -OB4PS)
Module Installation
This module mounts on a DIN rail. It connects to an adapter or another
FLEX I/O or Integra module. Note: If using this module with FLEX I/O
modules, do not mount between FLEX I/O modules. Mount Integra
modules to the right of FLEX I/O modules. To mount this module:
1.
Remove the cover plug (if used) in the male connector of the unit to
which you are connecting this module.
2.
Position the module on the 35 x 7.5mm DIN rail A (A-B pt. no.
199-DR1).
3.
Rotate the module onto the DIN rail with the top of the rail hooked
under the lip on the rear of the module.
41355
30720-M
A
A