Rockwell Automation 1762-IR4 RTD/Resistance Input Module - Manual (Page 2)

2 MicroLogix 1200 RTD/Resistance Input Module
Publication 1762-IN014B-EN-P - July 2013
Module Overview
The 1762-IR4 module receives and stores digitally converted analog data from RTDs or other
resistance inputs, such as potentiometers. The module supports connections from any
combination of up to 4 RTDs or other resistance inputs. See the input specifications on page 20
for supported RTD and resistance types, their associated temperature ranges, and the analog
input signal ranges that each channel supports. Each of the 4 input channels is individually
configurable for a specific input device and provides open- or short-circuit and over- or
under-range indication.
Description
Item Description Item Description
1a upper panel mounting tab 5 bus connector cover
1b lower panel mounting tab 6 flat ribbon cable with bus connector (female)
2 power diagnostic LED 7 terminal block
3 module door with terminal identification
label
8 DIN rail latch
4 bus connector with male pins 9 pull loop
9
3
5
2
1b
1a
7
6
4 8
6
1a
1b
2