Rockwell Automation 1732E-XXXX Ethernet/IP 24Vdc 16 Input Modules - Manual (Page 10)

10 ArmorBlock 16-Point EtherNet/IP Module, Series A
Publication 1732E-IN002B-EN-E - February 2011
Network Connectors
Refer to the pinout diagrams for the network connectors.
IMPORTANT
Use the 1585D–M4DC–H: Polyamide small body unshielded or the
1585D–M4DC–SH: Zinc die-cast large body shielded mating
connectors for the D-Code M12 female network connector.
When using shielded (STP) cable with metal housing WeldBlock
products 1732E-IB16M12W and 1732E-16CFGM12W, isolate the
shield at the ArmorBlock end of the cable. This minimizes the
effect of ground offsets.
IMPORTANT
Use two twisted pair CAT5E UTP or STP cable.
4
3
2
1
5
D-Code M12 Female Network Connector
44236
(View into Connector)
Pin 1
M12_Tx+
Pin 2 M12_Rx+
Pin 3 M12_Tx-
Pin 4 M12_Rx-
Pin 5 Connector Shell Shield GND
D-Code M12
Pin
Wire Color Signal 8-way Modular
RJ45 Pin
1 White-Orange TX+ 1
2 White-Green RX+ 3
3 Orange TX- 2
4 Green RX- 6