Rockwell Automation 1746-NT4 Series B,D17466.6.1 SLC 500 4-Channel Thermocouple/mV Input Module User Manual - Manual (Page 120)

Publication 1746-UM007C-EN-P - July 2004
E-4 Configuring the 1746-NT4 Module with RSLogix 500
5. Press OK to set the parameters. The following dialog box
appears.
6. Choose the data file for the configuration and the location for
the configuration rung within your ladder logic program.
7. Press OK. The following rung is added to the ladder logic
program.
This rung will send the configuration to the module on the first
program scan. The source and destination of the COP instruction
may change depending on what you entered in the channel tab
and the module location.