Rockwell Automation 1746-NT4 Series B,D17466.6.1 SLC 500 4-Channel Thermocouple/mV Input Module User Manual - Manual (Page 23)

Publication 1746-UM007C-EN-P - July 2004
Quick Start for Experienced Users 2-3
3. Insert the 1746-NT4 module into the chassis Reference
Make sure system power is off; then insert the thermocouple input module into your 1746
chassis. In this example procedure, local slot 1 is selected. Chapter 3
(Installation and
Wiring)
ATTENTION
Never install, remove, or wire modules with power
applied to the chassis or devices wired to the
module.
Card
Guide
T op and Bottom
Module Release(s)