Or 1 2 3, Install the power supply – Rockwell Automation 1785-LTx,D178510.3 QUICK START CLASSIC PLC-5 PROG User Manual

Page 11

Advertising
background image

2–4

Set up the Hardware

Publication 1785Ć10.3 - October 1996

Install the Power Supply

Locking

Bar

20619-M

Set the jumpers on

the back side of the

power supply like this:

Connect the power cord to the 120V ac

connector of the power supply module.

Install the power supply in the chassis

and snap the moduleĆlocking bar over

the modules.

This side plugs into connector on the module.

insert wire

here

place tool here

insert wire

here

place tool here

or

1

2

3

For more information, see the Redundant Power Supplies
(1771-P4R, -P6R) Installation Data, publication number 1771-2.166.

More

Advertising
See also other documents in the category Rockwell Automation Equipment: