Rockwell Automation 1761-NET-AIC Advanced Interface Converter (AIC+) User Manual - Manual (Page 22)

Publication 1761-UM004B-EN-P - June 2006
18 Installation and Wiring
1761-CBL-AP00 and 1761-CBL-PM02 Cable
1761-CBL-AP00 and 1761-CBL-PM02 Cable
Cable Length Connects External
Power
Supply
Required Selection
Switch
Setting
from to AIC+
Interface
Converter
1761-CBL-AP00,
1761-CBL-PM02
(1)
(1) Series B cables are required for hardware handshaking.
45 cm,
(17.7 in.),
2 m
(6.5 ft)
SLC 5/03, SLC
5/04, or SLC
5/05
processors,
channel 0 RS-232 (8-pin
mini-DIN)
communication
port Yes External
MicroLogix
1000, 1200,
and 1500
processors RS-232 (DB-9,
DTE)
Communication
Port
Yes
(2)
(2) An external power supply is required unless the AIC+ interface converter is powered by a MicroLogix controller
connected to the RS-232 (8-pin mini-DIN) communication port with a 1761-CBL-AM00 or 1761-CBL-HM02 or
equivalent cable.
External
PanelView
through NULL
modem adapter RS-232 (8-pin
mini-DIN)
communication
port Yes External
PC com port RS-232 (8-pin
mini-DIN)
communication
port Yes External
1761-CBL-PM02 (1)
1761-CBL-AP00