Rockwell Automation 1734D-1B8XOW8S 8 Input/8 Relay Output Module Installation Instructions - Manual (Page 8)

8 POINTBlock dc 8 Input/8 Relay Output Module
Publication 1734-IN021C-EN-P - September 2006
Set Node Address
Read this for information about how to set the node address.
To set the node address, set the combination of ones and tens
switches to correspond to the required address.
For example, for 61, set the tens switch to six and the ones switch to
one.
Node Address Switches and Status Indicators
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7 0-9
10-60
Inputs Outputs
Ones Node
Address
Rotary
Switch
Tens Node
Address Rotary
Switch
Module
Status
Network
Status
I/O
Status