Rockwell Automation 1756-NEX Nexus Module - Manual (Page 22)

2-2 Install the 1756-CLX/C Module
Publication 1756-UM524B-EN-P - December 2008
Install and Connect the Chassis and Power Supply
Before you install the module, you must install and connect a ControlLogix chassis and
power supply.
For information on installing these products, refer to the publications listed in the
following table.
Determine Module Slot Location
You can install the module in any slot in the ControlLogix chassis.The figure below shows
chassis slot numbering in a 4-slot chassis. Slot 0 is the first slot and is always the left-most
slot in the rack (the first slot to the right of the power supply).
Chassis
Type
Chassis
Installation
Power
Supply
Power Supply
Installation
Series B: 1756-A4, -A7, -A10,
-A13, -A17
Pub. No.
1756-IN08C
1756-PA72/B Pub. No.
1756-IN078B
1756-PB72/B
1756-PA75/A Pub. No.
1756-IN596A
1756-PB75/A
20805-M
1756-A4 Chassis Power Supply
Power Supply
Slot 0
Slot 1
Slot 2
Slot 3
Chassis