Rockwell Automation 1747-PCIL Chassis Interface Module for 1746 Local I/O - Manual (Page 6)

6 Chassis Interface Module for 1746 Local I/O
Publication 1747-5.32–April 1998
Installing the Adapter .
Important: The adapter must be installed in the left slot of the chassis
as shown below.
Selecting the Cable for Your Connections
The adapter must be connected to the scanner. Use one of the following
cables to make the connection:
• 3m interconnect cable (Cat. No. 1747-PCIC)
• 10m interconnect cable (Cat. No. 1747-PCIC2)
!
ATTENTION: Never install, remove, or connect cables
to the adapter with power applied to chassis.
Printed
Circuit
Board
30575–M 30574–M
2 1
Slide adapter into chassis
until adapter tabs ‘click’. Align circuit board with top
and bottom chassis guides.
Locking tab