Mount the i/o base – Rockwell Automation 1738-IE4CM12 ArmorPoint 4-Channel 24V dc Analog Input Modules, Series A User Manual
Page 5

ArmorPoint 4-Channel 24V dc Analog Input Module, Series A 5
Publication
1738-IN024C-EN-P - March 2010
Mount the I/O Base
Mount the I/O base on a wall or panel, using the screw holes provided in the
base
.
Mounting illustration for the ArmorPoint adapter with I/O bases
Follow the instructions to install the mounting base.
1. Lay out the required points as shown above in the drilling dimension
drawing.
2. Drill the necessary holes for M4 (#8) machine or self-tapping screws.
3. Mount the base using M4 (#8) screws.
4. Ground the system using the ground lug connection.
The ground lug connection is also a mounting hole.
IMPORTANT
The ArmorPoint I/O module must be mounted on a grounded metal
mounting plate or other conductive surface.
Adapter
102 mm
(4.02 in)
56 mm
(2.2 in)
46.25 mm
(1.8 in)
51.9 mm
(2.0 in)
20.1 mm
(0.8 in)
51.9 mm
(2.0 in)
51.9 mm
(2.0 in)
20.1 mm
(0.8 in)
43769