Rockwell Automation 1783-US8T Stratix 2000 Ethernet Unmanaged Switch Installation Instructions User Manual
Page 7
Stratix 2000 Ethernet Unmanaged Switch 7
Rockwell Automation Publication 1783-IN010A-EN-P - June 2013
1. Allow sufficient clearance between devices for ventilation and electrical isolation,
based on the clearances listed in the
2. Position the switch so that the top of the DIN rail mounting clip is slightly above
the upper DIN rail edge.
3. With the bottom of the switch angled away from the panel, slide the switch
downward until the mounting clip spring is behind the top edge of the DIN rail.
4. Press the switch downward to compress the spring.
5. Press the bottom of the switch toward the panel until the clip locks into place over
the bottom edge of the DIN rail.
32312-M
PWR
7
8
5
3
4
1
2
1783-US8T
6
53.6 mm
(2.11 in.)
53.6 mm
(2.11 in.)
135 mm
(5.31 in.)
106.5 mm
(4.19 in.
)
6 mm
(0.24 in.)
35 mm
(1.38 in.)
32313-M
Switch DIN Rail
Mount (open
)
Switch DIN Rail
Mount (closed)