Terminal wiring, Terminal block – Rockwell Automation 1746-NI8 SLC 500 Analog Input Module Instructions User Manual
Page 10
10 SLC 500™ Analog Input Module
Publication 1746-IN006A-US-P
Terminal Wiring
The 1746-NI8 module contains an 18-position, removable terminal block. The
terminal pin-out is shown below.
Terminal Block
!
ATTENTION
Disconnect power to the SLC before attempting to install,
remove, or wire the removable terminal wiring block.
To avoid cracking the removable terminal block, alternate the
removal of the slotted terminal block release screws.
Shield
Channel 0 (-)
Channel 1 (-)
Channel 2 (-)
Channel 3 (-)
Channel 4 (-)
Channel 5 (-)
Channel 6 (-)
Channel 7 (-)
Channel 0 (+)
Channel 1 (+)
Channel 2 (+)
Channel 3 (+)
Channel 4 (+)
Channel 5 (+)
Channel 6 (+)
Channel 7 (+)
Shield
(Terminal Block Spare Part Catalog Number 1746-RT25G)
Terminal Block Release Screw
Maximum Torque=0.7 to 0.9 Nm
(6 to 8 in-lbs.)
@JO"VTQQE
@JO"VTQQE
".
".