Rockwell Automation 1738-APB ArmorPoint PROFIBUS Adapter, Series A - Manual (Page 4)

4
Publication 1738-IN015C-EN-E - February 2010
Prevent Electrostatic Discharge
About the ArmorPoint PROFIBUS Adapter
The ArmorPoint PROFIBUS adapter ships with the adapter and a
terminating base to be used with the last I/O module on the backplane. The
sealed IP67 housing of the adapter requires no enclosure. Note that it is
possible that environmental requirements other than IP67 will require an
additional appropriate housing. PROFIBUS connectors are sealed M12
(micro) style.
ATTENTION
This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in appropriate
static-safe packaging.