Rockwell Automation 1786-BNCJI ControlNet Isolated Bulkhead Connector Installation Instructions User Manual
Controlnet isolated bulkhead connector
Advertising
Publication 1786-IN014B-EN-P - June 2001
Installation Instructions
ControlNet Isolated Bulkhead Connector
Catalog Number 1786–BNCJI
Use this document as a guide when you install a ControlNet isolated bulkhead connector.
This document should be packaged with 5 isolated bulkhead connectors.
About the Isolated Bulkhead Connector
The isolated bulkhead connector is a device used to allow ControlNet cable trunk lines to
pass through metal enclosures. The isolated bulkhead connector prevents the ControlNet
cable from inadvertently being grounded to metallic surfaces that may cause noise on a
network. Any number of isolated bulkhead connectors can be placed in a system.
Advertising